Viking Chains - Agard

Viking Chains

AV001-RC - Red Skane Hammer on Dragon Chain

This stunning Thor's hammer pendant is a replica of one from the Viking period that was found in Skane, Sweden. The hammer and dragon heads on the chain are cast from pewter and the chain and hanging loop are both stainless steel.
The stone is made from glass, which was a rare material 1000 years ago and was often used in jewellery because of its expensive nature.

The length of the standard chain is approx. 50cm, and the long version is around 70cm.

The standard version weighs 125g and the long version weighs 155g

Pendant Dimensions: 44 mm x 50 mm

Price: £74.99

AV001-RCK - Red Skane Hammer on Knit Chain

Price: £100.00

AV001-GC - Green Skane Hammer on Dragon Chain

This stunning Thor's hammer pendant is a replica of one from the Viking period that was found in Skane, Sweden. The hammer and dragon heads on the chain are cast from pewter and the chain and hanging loop are both stainless steel. 
The stone is made from glass, which was a rare material 1000 years ago and was often used in jewellery because of its expensive nature.

The length of the standard chain is approx. 50cm, and the long version is around 70cm.

The standard version weighs 125g and the long version weighs 155g

Pendant Dimensions: 44 mm x 50 mm

Price: £74.99

AV001-GCK - Green Skane Hammer on Knit Chain

This stunning Thor's hammer pendant is a replica of one from the Viking period that was found in Skane, Sweden. The hammer and dragon heads on the chain are cast from pewter and the knitted chain and hanging loop are both stainless steel. 

The stone is made from glass, which was a rare material 1000 years ago and was often used in jewellery because of its expensive nature. The stone at its centre is available in green, blue or red.

The chain is made of stainless steel using the trichinopoly method, also known as 'viking knit'. While it is not as flexible as a true chain composed of separate links, it is strong and comfortable to wear. The technique was used in the Viking age for suspension chains and necklaces. The pewter dragon heads are based on a pair found in Norway and are in the Urnes style of the 11th Century.

The total length of the chain is approx. 74cm. The whole piece weighs approx. 88g.

Pendant Dimensions: 44 mm x 50 mm

Price: £100.00

AV001-BC - Blue Skane Hammer on Dragon Chain

This stunning Thor's hammer pendant is a replica of one from the Viking period that was found in Skane, Sweden. The hammer and dragon heads on the chain are cast from pewter and the chain and hanging loop are both stainless steel. 
The stone is made from glass, which was a rare material 1000 years ago and was often used in jewellery because of its expensive nature.

The length of the standard chain is approx. 50cm, and the long version is around 70cm.

The standard version weighs 125g and the long version weighs 155g

Pendant Dimensions: 44 mm x 50 mm

Price: £74.99

AV001-BCK - Blue Skane Hammer on Knit Chain

This stunning Thor's hammer pendant is a replica of one from the Viking period that was found in Skane, Sweden. The hammer and dragon heads on the chain are cast from pewter and the knitted chain and hanging loop are both stainless steel. 

The stone is made from glass, which was a rare material 1000 years ago and was often used in jewellery because of its expensive nature. The stone at its centre is available in green, blue or red.

The chain is made of stainless steel using the trichinopoly method, also known as 'viking knit'. While it is not as flexible as a true chain composed of separate links, it is strong and comfortable to wear. The technique was used in the Viking age for suspension chains and necklaces. The pewter dragon heads are based on a pair found in Norway and are in the Urnes style of the 11th Century.

The total length of the chain is approx. 74cm. The whole piece weighs approx. 88g.

Pendant Dimensions: 44 mm x 50 mm

Price: £100.00

AV002-C - Dragon Hammer on Dragon Chain

A solid pewter dragon hammer based on an original find from Iceland. The hammer combines both the Thor's hammer and the crucifix and dates from a time when the majority of the population followed both religions.
The pendant is attached to the chain by a stainless steel ring and pewter dragon heads. The chain is stainless steel and based on designs from the Viking period.

The standard chain is approx. 50cm in length, and the long chain is approx. 70cm in length. The standard length version weighs approx. 100g, and the long version weights approx. 135g.

Pendant Dimensions: 33 mm x 56 mm

Price: £59.99

AV004-C - Mjolnir on Dragon Chain

This is a solid pewter Mjolnir or Thor's hammer replica of one from the Viking period that was found in Denmark. The dragon heads are also solid pewter and the stunning viking style chain and hanging loop are stainless steel.

The total length of the standard chain is approx. 50cm, and the long version is around 70cm. The whole piece weighs approx. 100g for the standard version, and 135g for the long version.

Pendant Dimensions: 28 mm x 33 mm

Price: £59.99

AV004-CK - Mjolnir on Knit Chain

This is a solid pewter Mjolnir or Thor's hammer replica of one from the Viking period that was found in Denmark. The dragon heads are also solid pewter and the stunning viking knitted chain and hanging loop are stainless steel.

The chain is made of stainless steel using the trichinopoly method, also known as 'viking knit'. While it is not as flexible as a true chain composed of seperate links, it is strong and comfortable to wear. The technique was used in the Viking age for suspension chains and necklaces. The pewter dragon heads are based on a pair found in Norway and are in the Urnes style of the 11th Century.

The total length of the chain is approx. 74cm. The whole piece weighs approx. 65g.

Pendant Dimensions: 28 mm x 33 mm

Price: £95.00
Jorvik Hammer on Dragon Chain

AV020-C - Jorvik Hammer on Dragon Chain

A solid pewter Thor's Hammer that merges viking period designs from York and the Isle of Man. The pendant is secured on a stainless steel ring that connects to a pair of pewter dragon heads. These in turn are connected to a stainless steel chain made to a design found in the Viking period.

The standard chain is 50cm long and it weighs approx. 100g. The long version is around 70cm in length, and weighs approx. 135g.

The pendant measures approx. 42x50mm.

Price: £64.99

AV023-C - Manx Gungnir on Dragon Chain

A Gungnir made of solid pewter. Gungnir is the spear of the Norse god Odin and is worn by Odin's followers for protection. The shaft is decorated with knotwork in a Manx style ring chain.

The Gungnir pendant comes attached to a viking style chain (approx. length 50cm or a 70cm long version) by a stainless steel ring and pewter dragon heads. The chain is stainless steel and based on designs from the Viking period.

This pendant is suitable for re-enactment or Larp use, or for modern wear. The pendant is made on the Isle of Skye in Scotland from lead-free pewter. Together with the chain it weighs approx. 90g for the standard length, or125g for the long chain option.

Pendant Dimensions: 15 mm x 51 mm

Price: £59.99

AV023-CK - Manx Gungnir on Knit Chain

A Gungnir made of solid pewter. Gungnir is the spear of the Norse god Odin and is worn by Odin's followers for protection. The shaft is decorated with knotwork in a Manx style ring chain.

The chain is made of stainless steel using the trichinopoly method, also known as 'viking knit'. While it is not as flexible as a true chain composed of seperate links, it is strong and comfortable to wear. The technique was used in the Viking age for suspension chains and necklaces. The pewter dragon heads are based on a pair found in Norway and are in the Urnes style of the 11th Century.

The total length of the chain is approx. 74cm. The whole piece weighs approx. 57g.

Pendant Dimensions: 15 mm x 51 mm

Price: £95.00

AV028-C - Faroese Hammer on Dragon Chain

Based on a viking age brooch find from the Faroe Islands, this new Asgard design expands on the style from that piece.

This large and chunky Thor's hammer comes on a stainless steel chain and hanging loop with pewter dragon heads. The standard length chain measures approx. 50cm, and the long version measures approx. 70cm.

Pendant Dimensions: 51 mm x 51 mm

Price: £77.49

AV028-CK - Faroese Hammer on Knit Chain

Based on a viking age brooch find from the Faroe Islands, this new Asgard design expands on the style from that piece.

The chain is made of stainless steel using the trichinopoly method, also known as 'viking knit'. While it is not as flexible as a true chain composed of separate links, it is strong and comfortable to wear. The technique was used in the Viking age for suspension chains and necklaces. The pewter dragon heads are based on a pair found in Norway and are in the Urnes style of the 11th Century.

The total length of the chain is approx. 74cm. The whole piece weighs approx. 78g.

Pendant Dimensions: 51 mm x 51 mm

Price: £110.00

AV030-C - Hiddensee Pendant on Dragon Chain

This pewter pendant is based on a Viking age lead alloy find from York. It is very similar to a number of gold pendants probably manufactured in Denmark and found in Hiddensee, Germany, which gives its name to this type.
The York pendant is missing a lot of fine detail and so we used a find from Tolstrup, Denmark for reference.
The dragon heads are pewter, and the hanging loop and chain are stainless steel.
The length of the chain is approx. 50cm for the standard length, and 70cm for the long versions.

The standard version weighs approx. 115g, and the long chain version weighs approx. 145g.

Pendant Dimensions: 41 mm x 47 mm

Price: £74.99

AV031-C - Uppsala Hammer on Dragon Chain

This pewter pendant is based on a Viking age silver hammer from Laby, Uppsala, Uppland, Sweden. It has been dated to the 10th century.

The dragon heads are also solid pewter and the stunning Viking style chain and hanging loop are stainless steel. The total length of the chain is approx. 50cm on the standard version, and 70cm on the long version. The whole piece weighs approx. 100g with the standard chain and 135g with a long chain.

Pendant Dimensions: 26 mm x 42 mm

Price: £59.99

AV031-CK - Uppsala Hammer on Knit Chain

This pewter pendant is based on a Viking age silver hammer from Laby, Uppsala, Uppland, Sweden. It has been dated to the 10th century.

The chain is made of stainless steel using the trichinopoly method, also known as 'viking knit'. While it is not as flexible as a true chain composed of separate links, it is strong and comfortable to wear. The technique was used in the Viking age for suspension chains and necklaces. The pewter dragon heads are based on a pair found in Norway and are in the Urnes style of the 11th Century.

The total length of the chain is approx. 74cm. The whole piece weighs approx. 69g.

Pendant Dimensions: 26 mm x 42 mm

Price: £95.00